| 1. | Application of systems engineering in the surface construction of bamianhe oilfield
系统工程在八面河油田地面建设中的应用 |
| 2. | Application of stochastic medium method to predict the influence degree on ground surface construction due to tunnel excavation
隧道开挖对地表建筑物影响的随机介质分析方法 |
| 3. | And the problem in the process of using multiresolution modeling techniques in reverse engineering were investigated , and some solutions for the problems occurring during the process were proposed , such as multiresolution section curves / surfaces construction etc
就小波多分辨率造型技术在逆向设计过程中应用时，截面线的构造以及曲线曲面的多分辨率表示等关键技术给出了解决方案。 |
| 4. | By enhancing side a supervision in oil and gas field surface construction , the quality consciousness of the whole staff is raised , the construction market is standardized and the project management means is perfected so as to effectively promote engineering quality of oil and gas field surface construction
通过加强油气田地面工程建设甲方监督工作，增强了全员质量意识，规范了建设市场，完善了项目管理手段，促进了油气田地面建设工程质量的提高。 |
| 5. | The project design of surface construction in m120 area of bamianhe oilfield has used systems engineering to optimize technology and avoid technology risk ; the overall situation viewpoint has been applied for the economic evaluation of the whole project to reduce the project economic risk most
八面河油田面120区块地面建设的方案设计，应用系统工程进行技术优化，避免了技术风险；按照全局性观点进行项目整体经济评价，最大限度地降低了项目的经济风险。 |
| 6. | This article researches the different results of marshal experiment for having used different type and dosage of fibre in asphalt mixture at no . 106 national highway in the north of hengshui , analyzes the fibre ' s effect on the result of marshal experiment and the reasons , and concludes the change pattern of indexes of marshal experiment , providing reference for the design and construt of the fibrasphalt concrete construction , and give the example of popularizing such road surface construction
摘要对国道106线衡水北段纤维沥青混凝土试验中所采用不同类型纤维及纤维用量的沥青混合料马歇尔试验结果进行研究，分析纤维对沥青混合料马歇尔试验结果的影响及原因，从中得出纤维沥青混合料马歇尔指标的变化规律，为纤维沥青混凝土路面结构的设计和施工提供参考依据，并为推广纤维沥青混凝土路面结构做出尝试。 |
| 7. | The characteristics of reverse engineering of real parts are investigated , with the methods of data acquisition ; the strategies and process of surface construction based on laser - scanned point cloud are presented ; the process of 3 - d expression based on real parts is indicated ; the methods of variant design through reverse engineering of real parts ; the process of variant design based on assembly models is presented
研究了实物反求的特点和数据采集的方法，重点分析了非接触式数据采集的原理和方法；总结了基于激光扫描点云进行曲面构建的流程和方法；提出基于实物样件进行三维表达的流程；研究了通过实物反求进行改型设计的方法，提出基于实物反求进行改型设计的流程。 |
| 8. | But the result showed that the osteoblast differentiation was not promoted significantly in the amphiphilic - amino acid modified pdl - la scaffold . the study of cytocompatible surface construction on pdl - la matrix via biomacromolecules entrapment - different polysaccharides ( alginate and chitosan ) were combined with
软骨细胞的细胞粘附率、增殖率和细胞活性以及细胞形态的实验结果表明，聚多糖及其氨基酸衍生物改性的聚乳酸表面能明显促进软骨细胞的粘附与生长，并具有较高的细胞活性。 |
| 9. | Based on the micro - surfacing material control , the design of mixing ratio of thin paste , the cure of damage of road surface , and the quality control of construction press , etc , the keys of micro - surfacing construction quality control was introduced and it is suggested that the means of material mixing experiment should be standardized and improved continuously so as to meet the demands of on - spot material control and to establish an effective quality supervision system , by which the effect of the micro - surfacing practice can be ensured
摘要从微表处的材料控制、稀浆混合料配合比设计、原路面病害的处理、施工过程质量控制等方面介绍微表处施工质量控制要点，提出有必要不断规范和完善混合料的试验方法，更好地适应现场施工控制的需要，并建立行之有效的质量监控体系，才能保证微表处的实施效果。 |
| 10. | This paper put forward the optimized methods include reconstructing the characteristic curve by reasonable use of the adjust tools and analyse tools of the modeling software , admeasuring the automotive model surface correctly , simulating the breaking surface and creating the surface in the right turns which is good for modeling a smooth and exactitude surface . at last , after the correct analysis of the factors which are effect to the surface construction , a smooth and exactitude surface of the similar diamond concept car has been constructed by using the right optimize method
本文通过合理利用反求软件中的造型工具和分析工具，正确划分反求模型的造型区域，使用正确的曲面造型方法，对反求曲面的特征网格线进行二次优化，并对突变曲面进行拟合再生成处理及建立合理的曲面生成顺序等方法，最终获得了仿型度和光顺度都很高的反求曲面。 |
